MFC-J6920DW
 |
Vanliga frågor & felsökning |
MFC-J6920DW
Datum: 2018-09-03 ID: faq00003017_006
Make a two-sided copy of an ID card.
You can copy both sides of an ID card onto a single page, keeping the card's original size.
-
The machine's paper size must be set to Letter or A4.
-
You can only make one color copy at a time.
-
You cannot use the ADF High Speed Mode, Book Copy, Sort, 2-sided Copy, Thin Paper Copy, Ink Save Mode, Enlarge/Reduce, Watermark Copy and Remove Background Color settings with the 2in1 (ID) feature.
*for some available models
Follow the steps below to use your Brother machine's 2 in 1 ID Copying feature:
-
Place your ID card face down on the upper-left corner of the flat scanner glass.
*1: 0.12 in. (3mm) or greater (top, left)
*2: 8.5 in. (216 mm)
*3: 5.5 in. (140 mm)
*4: scannable area
-
Press
(Copy).
-
You can enter the number of copies in the following ways:
-
Use the dial pad on the Touchpanel.
-
Press - or + on the Touchscreen (as shown below).
-
Use the dial pad on the Touchpanel.
-
Press Options.
-
Press the Up or Down arrow key to display Page Layout.
-
Press Page Layout.
-
Press the Up or Down arrow key to display 2in1 (ID).
-
Press 2in1 (ID).
-
Read and confirm the list of your selected settings.
-
Press OK.
-
Do one of the following:
- Press Black (Mono) Start to make a black and white copy.
- Press Color (Colour) Start to make a color copy.
The machine will scan one side of your ID card.
-
After the machine has scanned one side, press Yes.
-
Turn over the ID card.
- Press OK to scan the other side of the ID card.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.