MFC-J497DW
Vanliga frågor & felsökning |
MFC-J497DW
Datum: 2019-05-23 ID: faq00000615_009
Forward a fax to another fax machine when my machine has a mechanical issue.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the machine's display (hereinafter called LCD):
- Unable to Clean XX (Clean Unable XX)
- Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
- Unable to Print XX (Print Unable XX)
- Unable to Scan XX (Scan Unable XX)
- Press Stop/Exit to interrupt the error temporarily.
- Press Settings and select Service > Data Transfer > Fax Transfer.
-
Do one of the following:
-
If the LCD displays No Data, there are no faxes left in the machine's memory.
Press , and then press Stop/Exit. - Enter the fax number where faxes will be forwarded.
-
If the LCD displays No Data, there are no faxes left in the machine's memory.
- Press Black (Mono) Start.
-
If you have not set up your Station ID, you cannot enter Fax Transfer mode.
> Click here to see how to set up the Station ID. -
You can send the Fax Journal report to another fax machine.
Press Settings and select Service => Data Transfer => Report Trans. in STEP 2.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.