HL-4070CDW
 |
Vanliga frågor & felsökning |
HL-4070CDW
Datum: 2014-01-27 ID: faq00000309_003
"JAM REAR" error appears on the LCD. What should I do?
If a paper jam occurs behind the face-up output tray, follow these steps:
After you have just used the printer, some internal parts of the printer will be extremely hot. When you open the front cover or back cover of the printer, DO NOT touch the shaded parts shown in the illustrations.
-
Open the back cover.
-
Pull the tabs at the left and right hand sides toward you and fold down the fuser cover (1).
-
Using both hands, gently pull the jammed paper out of the fuser unit.
After you have just used the printer, some internal parts of the printer will be extremely hot. Wait for the printer to cool down before you touch the internal parts of the printer.
-
Close the fuser cover (1) and lift the tabs at the left and right hand sides.
-
Fully close the back covers.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.