HL-1650
![]() |
Vanliga frågor & felsökning |
![](/g/b/img/product/hl1650_all.jpg)
HL-1650
Datum: 2013-05-10 ID: faq00000216_010
White spots on black text and graphics or black spots appear at 94 mm (3.7 in.) intervals.
![](/g/b/img/faqend/faq00000216_010/eu_ot/en/91896/spots.gif)
If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface.
Clean the drum unit as follows:
-
Position the print sample in front of the drum unit, and find the exact position of the poor print.
-
Turn the drum unit gear by hand while looking at the surface of the OPC drum.
-
When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off.
![](/g/b/img/faqend/faq00000216_010/eu_ot/en/6873/HL50_067.gif)
Do not try to clean the surface of the photosensitive drum with a sharp object, such as a ball-point pen, and so on.
If the problem still occurs even after you have cleaned the drum unit, the drum unit may be damaged. Put in a new drum unit. To see how to replace the drum unit, click here.
Also, the toner cartridge may be damaged. Put in a new toner cartrudge, To see how to replace the toner cartridge, click here.
Feedback om innehållet
Observera att detta formulär endast används för feedback.