HL-L2365DW
Vanliga frågor & felsökning |
HL-L2365DW
Datum: 2016-03-24 ID: faq00000208_042
Clean the corona wire
Follow the steps below to clean the corona wire.
-
Open the front cover.
-
Remove the toner cartridge and drum unit assembly from the machine.
-
Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
Be sure to return the tab to the Home position (). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.
-
Install the toner cartridge and drum unit assembly back into the machine.
- Close the front cover of the machine.
HL-L2300D, HL-L2340DW, HL-L2360DN, HL-L2365DW
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.