DCP-L2550DN
![]() |
Vanliga frågor & felsökning |
![](/g/b/img/product/dcpl2550dn_eu.jpg)
DCP-L2550DN
Datum: 2018-05-23 ID: faq00000151_042
Faint
Check the following points to resolve the issue:
-
If the machine indicates Replace Toner status, install a new toner cartridge.
> Click here to see how to replace the toner cartridge. -
Check the machine's environment. Conditions such as humidity, high temperatures, and so on, may cause this print fault.
Refer to Product Safety Guide available on the Manuals section. -
If the whole page is too light, Toner Save Mode may be turned on. Turn off Toner Save Mode in the machine's menu settings or the printer driver.
> Click here to see how to turn the Toner Save Mode on or off. -
Clean the drum unit.
> Click here to see how to clean the drum unit. -
Clean the corona wire on the drum unit.
> Click here to see how to clean the corona wire. -
Replace the toner cartridge with a new toner cartridge.
> Click here to see how to replace the toner cartridge. -
Replace the drum unit with a new drum unit.
> Click here to see how to replace the drum unit.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.