Vanliga frågor & felsökning

Stäng

DCP-L2510D

Vanliga frågor & felsökning

Vanliga frågor & felsökning

DCP-L2510D

Är detta inte din produkt?

Datum: 2022-01-31 ID: faq00000110_514

Set Sleep Mode Countdown

The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
  • You can choose how long the machine must be idle before it goes into Sleep Mode.
  • The timer will restart if any operation is carried out on the machine, such as receiving a print job.

DCP-L2510D/DCP-L2530DW/DCP-L2537DW/DCP-L2550DN/MFC-L2710DN/MFC-L2710DW

  1. Press Menu.
  2. Press or to display the [General Setup] option, and then press OK.
  3. Press or to display the [Ecology] option, and then press OK.
  4. Press or to display the [Sleep Time] option, and then press OK.
  5. Using the dial pad, enter the length of time the machine (maximum 50 minutes) is idle before entering Sleep Mode, and then press OK.
  6. Press Stop/Exit.

MFC-L2730DW/MFC-L2750DW

  1. Press [Settings]>[All Settings]>[General Setup]>[Ecology]>[Sleep Time].
  2. Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and then press [OK].
  3. Press .

Relaterade modeller

DCP-L2510D, DCP-L2530DW, DCP-L2537DW, DCP-L2550DN, MFC-L2710DW, MFC-L2730DW, MFC-L2750DW

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.

Skicka