Часто задаваемые вопросы и устранение неполадок

Закрыть

Innov-is 350SE

Часто задаваемые вопросы и устранение неполадок

Часто задаваемые вопросы и устранение неполадок

Дата: 31.03.2016 Номер: faqh00000135_000

"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?

The start/stop button was pressed without connecting the foot controller while the setting for adjusting the stitch width using the sewing speed controller is set to [ON].
You have selected a pattern for which width control cannot be used.

 

 

Each time a key is pressed or an incorrect operation is performed, a beep is sounded.

  • For a correct operation
    One beep is sounded.
  • If an incorrect operation is performed
    Two or four beeps are sounded.
  • If the machine locks up, for example, because the thread is tangled
    The sewing machine continues to beep for four seconds.
    The machine automatically stops.
    Be sure to check for the cause of the error, and correct it before continuing to sew.

 

Связанные модели

CS-8120, Innov-is 100, Innov-is 1250, Innov-is 350SE, Innov-is 400, Innov-is 450, Innov-is 500, Innov-is 500D, Innov-is 550SE/ 550, Innov-is 600, Innov-is 650, Innov-is 670, Innov-is 900, Innov-is 950, NX-400Q/400, NX-600, QS-480 Quilter's Edition, QS-960 Quilter's Edition

Если вам потребуется дополнительная помощь, обратитесь в службу поддержки Brother:

Отзывы о материалах

Чтобы помочь нам улучшить поддержку пользователей, просим вас поделиться своим мнением, ответив на вопросы ниже.
Шаг 1. Насколько помогла вам информация, представленная на этой странице?
Шаг 2. Есть ли у вас какие-либо дополнительные комментарии?

Обратите внимание, что эта форма используется только для отправки отзывов.