HL-6180DW
Часто задаваемые вопросы и устранение неполадок |
HL-6180DW
Дата: 04.02.2011 Номер: faq00000231_036
Wrinkles or creases
Please check the following points to solve the problem:
- Make sure that the paper is loaded properly.
- The paper is below the maximum paper mark (1). Over filling the paper tray will cause paper jams.
- The side to be printed on must be face down.
- The paper guides touch the sides of the paper so it will feed properly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.
- The paper is below the maximum paper mark (1). Over filling the paper tray will cause paper jams.
- Check the paper type and quality.
Please refer to FAQs, "What kind of paper can I use?" and "What is the recommended paper?"
- Turn over the stack of paper in the tray or try rotating the paper 180 degree in the paper tray.
DCP-7055R, DCP-7055WR, DCP-7057R, DCP-7057WR, DCP-7060DR, DCP-7065DNR, DCP-7070DWR, DCP-8110DN, DCP-8250DN, FAX-2845R, FAX-2940R, HL-5440D, HL-5450DN, HL-5470DW, HL-6180DW, MFC-7360NR, MFC-7860DWR, MFC-8520DN, MFC-8950DW
Если вам потребуется дополнительная помощь, обратитесь в службу поддержки Brother:
Отзывы о материалах
Чтобы помочь нам улучшить поддержку пользователей, просим вас поделиться своим мнением, ответив на вопросы ниже.
Шаг 1. Насколько помогла вам информация, представленная на этой странице?
Шаг 2. Есть ли у вас какие-либо дополнительные комментарии?
Обратите внимание, что эта форма используется только для отправки отзывов.