Please check the following points to solve the problem:

NOTE: Illustrations shown below are from a representative product, and may differ from your Brother machine.

1. Check the machine's environment. Conditions such as high humidity and high temperatures may cause this print quality problem.
   
   
2. Check that you use the paper that meets our specifications. Click here to see the details of the recommended paper.
   
   
3. Make sure that the media type setting in the driver matches the type of paper you are using.
   
   
4. Make sure that the two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.
   
   
   
   
   If you use thick paper and still have the problem, we recommend trying to print with the two gray levers pulled down as shown below.
   
   
   
   
5. Make sure that the back cover is closed properly.
   
   
   
   
6. The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.
   
   
   • Click here to see the details of how to install the drum unit.
   • Click here to see the details of how to install the toner cartridges.