PT-D610BT
Întrebări frecvente şi depanare |
PT-D610BT
Dată: 22/03/2022 ID: faqp00001293_017
How do I eliminate the margin from the start or end of my label when printing?
Due to the construction of the tape mechanism, the approximately 23 mm (0.9") piece of tape that is produced prior to every label cannot be eliminated. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
The following method is useful for reducing tape use:
- Press the [Function] key ( ).
- Press or to select [Cut Option], and then press the [OK] key or [Enter] key ( / ).
-
Press or to select [Small Margin], [Chain] or [No Cut], and then press the [OK] key or [Enter] key.
This eliminates the margin at the end of the tape after printing as shown below:Setting Description Example Small Margin Automatically cuts a piece of blank tape before printing the first label and then cuts the tape after each label is printed, leaving a 2 mm (0.08") margin at both ends of each label. -
When the label length is approx.23 mm (0.9") or more
- 2 mm (0.08")
- Approx. 23 mm (0.9")
-
When the label length is approx. 23 mm (0.9") or less
- 2 mm (0.08")
- Approx. 23 mm (0.9")
Chain - Automatically cuts a piece of blank tape before printing the first label and then cuts the tape after each label is printed, leaving a 2 mm (0.08") margin at both ends of each label.
- When the last label is printed, the tape is not fed and cut. Press the [Shift] key ( / ) and [Feed] key ( ) to feed and cut the tape.
-
- 2 mm (0.08")
- Cut Position
- Approx. 23 mm (0.9")
No Cut - Select this setting when printing multiple copies of a label or when using Fabric Iron-On Tapes or other special tapes that cannot be cut by the tape cutter of the printer.
-
When the last label is printed, the tape is not fed and cut.
- Press the [Shift] key ( / ) and [Feed] key ( ) to feed and cut the tape.
- When using the special tapes that cannot be cut by the Tape Cutter of the printer, remove the Tape Cassette from the printer and use scissors to cut the tape.
-
- 2 mm (0.08")
- 23 mm (0.9")
-
When the label length is approx.23 mm (0.9") or more
PT-D610BT
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?
Pasul 2: Doriţi să adăugaţi comentarii?
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.