Innov-is XP3

Întrebări frecvente şi depanare

Innov-is XP3

Dată: 09/08/2018 ID: faqh00000636_002

When attaching an embroidery foot, always press on the screen. You may accidentally press the Start/Stop button and possibly cause injury.
Be sure to use embroidery foot W when doing embroidery. Using another embroidery foot may cause the needle to strike the embroidery foot, causing the needle to bend or break and possibly cause injury.

Press the Needle Position button to raise the needle.
Press to lock all keys and buttons.
* If the message OK to automatically lower the presser foot? appears on the LCD screen, press OK to continue.
Raise the presser foot lever.
Press the black button on the presser foot holder and remove the presser foot.

(1) Black button
(2) Presser foot holder

Loosen the screw of the presser foot holder to remove the presser foot holder.

(1) Multi-purpose screwdriver
(2) Presser foot holder screw
(3) Presser foot holder
Position the embroidery foot W on the presser foot bar by aligning the notch of the presser foot to the large screw.

Side view

Hold the embroidery foot in place with your right hand, and then use the included multi-purpose screwdriver to securely tighten the presser foot holder screw.

(1) Presser foot holder screw

Use the included multi-purpose screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury.
Press to unlock all keys and buttons.
>> All keys and operation buttons are unlocked, and the previous screen is displayed.

Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.

Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?

Foarte mulţumit

Mulţumit

Nemulţumit

Pasul 2: Doriţi să adăugaţi comentarii?

Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.