DCP-L2600D
 |
Întrebări frecvente şi depanare |
DCP-L2600D
Dată: 27/11/2018 ID: faq00100380_004
After the selected tray is out of paper, the Brother Machine prints by different paper size and paper types from another tray.
There is the case that after the selected tray is out of paper, the Brother Machine continues to print from another tray. In this case, configure the Auto Continue to Off. The default setting is On. Follow the steps below to configure the Auto Continue.
- Press Menu.
- Press the Up or Down arrow key to select Printer, and then press OK.
- Press the UP or Down arrow key to select Auto Continue, and then press OK.
- Press the UP or Down arrow key to select Off, and then press OK.
- Press Stop/Exit.
After configuring the Auto Continue to Off, configure the Tray Setting to the size you want to use.
If you configure the Auto Continue to Off, you cannot use customize paper in Printing Preferences.
DCP-B7500D, DCP-B7520DW, DCP-L2512D, DCP-L2532DW, DCP-L2552DN, DCP-L2600D, DCP-L2622DW, DCP-L2640DN, MFC-B7710DN, MFC-B7715DW, MFC-L2712DN, MFC-L2712DW, MFC-L2802DN, MFC-L2802DW
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.