MFC-L3770CDW
![]() |
Întrebări frecvente şi depanare |
![](/g/b/img/product/mfcl3770cdw_us_eu_as.jpg)
MFC-L3770CDW
Dată: 07/01/2019 ID: faq00100207_002
Load and Print Labels Using the MP Tray
When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine. Use this paper feed and output method when you print on labels.
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer.
-
Open the machine's back cover (the face up output tray).
-
On the front of the machine, open the MP tray and lower it gently.
-
Pull out the MP tray support (1) and unfold the flap (2).
- Slide the MP tray paper guides to fit the width of the paper you are using.
-
Load paper with the printing surface face up in the MP tray.
Make sure the paper is below the maximum paper mark (1).
- Change your print preferences in the Print screen before sending the print job from your computer.
- Send your print job to the machine.
- Close the back cover (the face up output tray) until it locks in the closed position.
Întrebări frecvente asociate
MFC-L3770CDW
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?
Pasul 2: Doriţi să adăugaţi comentarii?
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.