DCP-8110DN
Întrebări frecvente şi depanare |
DCP-8110DN
Dată: 07/11/2012 ID: faq00003023_000
Configure the boot method through the front panel of my Brother machine.
Follow the steps below to configure the boot method.
- Press Menu.
- Press the Up or Down arrow key to choose Network and press OK.
- Press the Up or Down arrow key to choose TCP/IP and press OK.
- Press the Up or Down arrow key to choose Boot Method and press OK.
- Press the Up or Down arrow key to choose Auto, Static, RARP, BOOTP or DHCP and then press OK.
- For all selections, except Static, you will be asked to specify the number of times the machine tries to obtain an IP address - IP Boot Tries. The default is 3. Press OK.
- Press Stop/Exit.
DCP-8110DN, DCP-8250DN, MFC-8510DN, MFC-8520DN
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?
Pasul 2: Doriţi să adăugaţi comentarii?
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.