HL-2250DN
![]() |
Întrebări frecvente şi depanare |
![](/g/b/img/product/hl2250dn_eu_as.jpg)
HL-2250DN
Dată: 19/07/2010 ID: faq00000309_012
JAM REAR
When the JAM REAR message appears, the following LED indications is shown on the control panel. The Error LED is flashing.
Please follow the steps below to solve the problem:
After you have just used the printer, some internal parts will be extremely hot. Wait at least 10 minutes for the machine to cool down.
- Open the back cover (face-up output tray).
- Pull down the tabs at the left and right hand sides to open the fuser cover (1).
- Using both hands, gently pull the jammed paper out of the fuser unit.
- Close the fuser cover (1) and the back cover (face-up output tray).
- Make sure that the Error LED is off and then, the Ready LED lights. If the machine does not start printing automatically, press the Go button.
Always remove all paper from the paper tray and straighten the stack when you add new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Întrebări frecvente asociate
HL-2130, HL-2135W, HL-2240, HL-2240D, HL-2250DN
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?
Pasul 2: Doriţi să adăugaţi comentarii?
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.