DCP-T310
![]() |
Întrebări frecvente şi depanare |
![](/g/b/img/product/dcpt310_all.jpg)
DCP-T310
Dată: 26/04/2018 ID: faq00000110_513
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
- The timer will restart if any operation is carried out on the machine, such as receiving a fax or a print job.
- The factory setting is five minutes.
- When the machine goes into Sleep Mode, the LCD backlight turns off.
DCP-T310/DCP-T510W/DCP-T710W
- Press Menu.
- Press
or
to select the following:
- Select [General Setup]. Press OK.
- Select [Ecology]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1 Min], [2 Mins], [3 Mins], [5 Mins], [10 Mins], [30 Mins], or [60 Mins]. Press OK.
- Press Stop/Exit.
MFC-T910DW
- Press Settings.
- Press
or
to select the following:
- Select [General Setup]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]. Press OK.
- Press Stop/Exit.
DCP-T310, DCP-T510W, DCP-T710W, MFC-T910DW
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?
Pasul 2: Doriţi să adăugaţi comentarii?
Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.