TD-4750TNWBR
![]() |
Perguntas mais frequentes e Resolução de problemas |
![](/g/b/img/product/lptd4750tnwbreuk.jpg)
TD-4750TNWBR
Data: 01-12-2021 ID: faqp00100470_001
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
- Turn off the printer.
- Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED color will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
Parameter Default setting Speed 76 mm/sec (3 ips) Density 8 Label Width 101.5 mm (4") Label Height 101.5 mm (4") Sensor Type Gap sensor Gap Setting 3 mm (0.12") Print Direction 0 Reference Point 0,0 (upper left corner) Offset 0 Tear Mode On Label Peeler off Mode Off Cutter Mode Off Code Page 850 Country Code 001 Clear Flash Memory No
< Printer initialization from the LCD >
You can also activate printer initialization from the LCD.
-
In the LCD, select the Menu icon
.
- In the Main menu, select Advanced.
- Select Initialization.
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.