PT-7500
Perguntas mais frequentes e Resolução de problemas |
PT-7500
Data: 17-06-2020 ID: faqp00001287_008
How do I make a label with a barcode?
Please follow the steps below:
-
Set bar code parameters
- Press , then .
- Press or until the parameter that you wish to change is displayed.
- Press or until the desired setting is displayed.
- Repeat the step "b" and the step "c" until all parameters are set as you wish.
- Press .
-
Enter the bar code data
- Press .
- Type in the new bar code data or edit the old data.
-
Add the bar code to the text
- Press to add the bar code to the text.
The following bar code parameters are available:
Parameter | Settings |
---|---|
PROTOCOL | CODE 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128 |
WIDTH (bar width) | SMALL, MEDIUM, LARGE |
UNDER# (numbers printed below bar code) | ON, OFF |
CHECK DIGIT* | OFF, ON |
*The CHECK DIGIT parameter is available only with the CODE 39, I-2/5 and CODABAR protocols.
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.