MFC-J6530DW
 |
Perguntas mais frequentes e Resolução de problemas |
MFC-J6530DW
Data: 10-04-2017 ID: faq00100347_500
Load Documents in the Automatic Document Feeder (ADF)
The ADF can hold multiple pages and feeds each sheet individually.
Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.
Document Sizes and Weights
| Length *1: | 148 to 431.8 mm |
| Width: | 105 to 297 mm |
| Paper Weight: | 64 to 90 g/m² |
*1
Up to 900 mm when using the long paper function.
- IMPORTANT
-
DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
Make sure documents with correction fluid or written in ink are completely dry.
(MFC-J3930DW/MFC-J6930DW/MFC-J6935DW)
Your 2-sided documents can be faxed, copied, or scanned up to A3 size using the ADF.
- Fan the pages well.
- Adjust the paper guides (1) to fit the document size.
- Place your document face up in the ADF, as shown in the illustration, until you feel the document touch the feed rollers and the machine beeps.
If you loaded a small size document and cannot remove it, lift the ADF document support (1), and then remove the document.
- IMPORTANT
- DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.
Perguntas mais frequentes relacionadas
MFC-J6530DW, MFC-J6930DW, MFC-J6935DW
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.