HL-L5200DW(T)
 |
Perguntas mais frequentes e Resolução de problemas |
HL-L5200DW(T)
Data: 26-02-2020 ID: faq00000310_500
Paper is Jammed in the 2-sided Tray
If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps:
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Pull the paper tray completely out of the machine.
- At the back of the machine, pull the 2‑sided tray completely out of the machine.
- Pull the jammed paper out of the machine or out of the 2‑sided tray.
- Remove paper that may have jammed under the machine due to static electricity.
- If paper is not caught inside the 2-sided tray, open the back cover.
- WARNING
- HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.
- Use both hands to gently pull the jammed paper out of the back of the machine.
- Close the back cover until it locks in the closed position.
- Put the 2-sided tray firmly back in the rear of the machine.
- Put the paper tray firmly back in the front of the machine.
Perguntas mais frequentes relacionadas
HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.