HL-1212W
Perguntas mais frequentes e Resolução de problemas |
HL-1212W
Data: 25-07-2014 ID: faq00000105_035
Reset the network settings to the factory default
You can use your machine's On/Off button to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management.
-
Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
-
While holding down (Power On/Off), open and close the top cover.
-
Release (Power On/Off). Make sure that all the LEDs turn off.
-
Press (Power On/Off) six times.
The machine will restart.
HL-1210W, HL-1212W
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.