QL-1060N
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
![](/g/b/img/product/ql1060neuk.jpg)
QL-1060N
Data: 17/07/2019 Identyfikator: faqp00100488_000
I cannot print on the 103 mm wide label roll on a network using the latest printer driver.
You may need to update your printer's paper information using a BLF file if the following situations occur:
- P-touch Editor does not detect the 103 mm wide label roll.
-
The printer's page shows "/" or "102mm/4" in View Configuration > Media Type for Paper Source.
To update the paper information:
-
Download the BLF file:
QL-1060N -
Download BRAdmin Professional from the [Downloads] section of this website to transfer the BLF file to your network-connected printer.
- Start BRAdmin Professional.
- Right-click the printer or print server you want, and select [Load Firmware (Manual)].
- Select [TFTP PUT], and then click [OK].
- Enter the default password (access).
- Select the downloaded BLF file, and then click [OK].
- When the file transfer is complete, turn the printer off and then on again.
- Confirm that the 103 mm wide paper can be selected in P-touch Editor or is shown on the printer's Web Based Management page.
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.