TD-4420TN
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
![](/g/b/img/product/lptd4420tneuk.jpg)
TD-4420TN
Data: 14/04/2020 Identyfikator: faqp00001434_011
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Push the print head release button to open the print head mechanism.
- Turn off the printer.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
1. Gap Sensor
2. Black Mark SensorWe recommend cleaning the sensors as required.
< Clean the Tear Bar/ Peel Bar >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Wipe the tear bar or peel bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
1. Tear Bar 2. Peel Bar
< Clean the Exterior/ Interior >
Exterior: Wipe it with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Powiązane odpowiedzi na często zadawane pytania
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.