SDX2250D
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
![](/g/b/img/product/hf_sdx2250deuk.jpg)
SDX2250D
Data: 03/10/2018 Identyfikator: faqh00000691_002
The mat is fed in at an angle.
Possible Causes (or Results)
Case1 : | The mat was inserted into the feed slot at an angle. |
Case2 : | The corners of the mat are deformed (bent). |
Case3 : | The rear tray is not pulled out. |
Case4 : | The feed roller is not positioned correctly. |
Case5 : | The shaft is released. |
Solutions
----- Case1 -----
Press the (Feed) button to feed out the mat.
Re-insert the mat straight in.
![]() |
![]() |
![]() |
----- Case2 -----
Replace the mat with a new one.
----- Case3 -----
Pull out the rear tray.
----- Case4 -----
Adjust the position of the feed roller.
For details, refer to Adjusting the Position of the Feed Roller
----- Case5 -----
Lock the shaft.
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.