HL-L9310CDW(T)
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
HL-L9310CDW(T)
Data: 24/03/2017 Identyfikator: faq00100411_000
Reset the Belt Unit Counter
When you replace a belt unit with a new one, you must reset the belt unit counter by completing the following steps:
DO NOT reset the belt unit counter unless you are replacing the belt unit.
- Make sure the machine is turned on.
-
Press (Settings).
If your machine displays the All Settings menu on the Home screen, skip this step.
- Press All Settings => Machine Information or Machine Info. => Parts Life.
- Press and hold Belt until the machine's display message changes.
- Press Yes.
- Press (Home).
Powiązane odpowiedzi na często zadawane pytania
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.