DCP-1612WE
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
DCP-1612WE
Data: 25/09/2014 Identyfikator: faq00003167_008
Load paper in the paper tray
Follow the steps below to load paper in the paper tray:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Open the front cover.
-
Adjust the paper guide.
-
Fan the paper.
-
Load paper with the printing surface face up in the paper tray.
-
Adjust the paper guides to fit the paper.
Make sure that your papers are loaded properly.
-
Open the top cover.
-
Lift the paper support flap.
-
Close the top cover.
After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
-
Open the front cover.
-
Adjust the paper guide, and then install the A5 paper tray part you unpacked earlier.
-
Fan the paper.
-
Load paper with the printing surface face up in the paper tray.
-
Press and slide the paper guides to fit the paper.
-
Adjust the paper guide.
Make sure that your papers are loaded properly.
-
Open the top cover.
-
Lift the paper support flap.
-
Close the top cover.
After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
Powiązane odpowiedzi na często zadawane pytania
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.