ADS-2700W
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
ADS-2700W
Data: 15/02/2018 Identyfikator: faq00002886_500
Replace the Brake Roller
Your machine is equipped with a scan counter that automatically counts how many times the machine has scanned. After approximately 100,000 scans, you may have to replace the Brake Roller.
- Press the release tab to open the Front Cover (1).
- While pushing the left side of the Brake Roller Cover (1) from the back of the machine, pull the cover down.
- Lift the shaft of the Brake Roller (1) with your finger to remove the roller.
- Fit the shaft of the new Brake Roller (1) into the slot in the opening and insert the Brake Roller into the machine.
- Close the Brake Roller Cover.
- Close the Front Cover.
- NOTE
-
The touchscreen or LED indications do not display either a Replace Roller or Replace Parts message.
Powiązane odpowiedzi na często zadawane pytania
ADS-2200, ADS-2700W
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.