MFC-J5720DW
![]() |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
![](/g/b/img/product/mfcj5720dw_us_eu_as.jpg)
MFC-J5720DW
Data: 27/02/2015 Identyfikator: faq00000694_030
Document Jam (With Video Instructions)
The document was not inserted or fed properly, or the document scanned from the ADF was too long.
Take out the jammed paper depending on where it is jammed in ADF unit.
![]() |
You can see the steps with video clips.
|
Case1: If the document is jammed in the top of the ADF unit
- Take out any paper from the ADF that is not jammed.
- Open the ADF cover.
-
Remove the jammed document by pulling it upward.
-
If you cannot remove the jammed paper, open the feed tray(1) and then remove the jammed paper.
- Close the feed tray before closing the ADF cover.
-
If you cannot remove the jammed paper, open the feed tray(1) and then remove the jammed paper.
- Close the ADF cover.
-
Press
(Cancel).
To avoid document jams close the ADF cover correctly by pressing it down in the center.
Case2: If the document is jammed inside the ADF unit
- Remove any paper that is not jammed out of the ADF.
- Lift the document cover.
-
Pull the jammed document out to the right.
- Close the document cover.
-
Press
(Cancel).
Case3: If the small document is jammed in the ADF
- Lift the document cover.
-
Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through.
- Close the document cover.
-
Press
(Cancel).
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.