FAQs & Troubleshooting

Close

MFC-9460CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9460CDN

Not your product?

Date: 22/11/2018 ID: faq00000197_024

Reduce the size of a received fax to fit the size of the paper in the Brother machine

  • Turning on Auto Reduction will automatically reduce the size of an incoming fax to fit the size of the paper in your machine. To set Auto Reduction mode ON, follow the instructions listed below:
    *If your Brother machine has a Touchscreen, please follow the steps under "For Touchscreen models" below.
    1. If the FAX mode key is not illuminated, press it.
    2. Press Menu.
    3. Press the Up or Down Arrow key to select Fax. Press OK.
    4. Press the Up or Down Arrow key to select Setup Receive. Press OK.
    5. Press the Up or Down Arrow key to select Auto Reduction. Press OK.
    6. Press the Up or Down Arrow key to select On. Press OK.
    7. Press Stop/Exit.

     

    <For Touchscreen models>
    1. Press MENU on the Touchscreen.
    2. Press the Up or Down Arrow key to display Fax. Press Fax.
    3. Press the Up or Down Arrow key to display Setup Receive. Press Setup Receive.
    4. Press the Up or Down Arrow key to display Auto Reduction. Press Auto Reduction.
    5. Press On.
    6. Press Stop/Exit key on the control panel.

     

  • The machine calculates the reduction ratio by using the page size of the fax and your Paper Size setting.
    Verify the paper size is set correctly.

Related Models

MFC-8510DN, MFC-8910DW, MFC-8950DW, MFC-9460CDN, MFC-9970CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.