PT-D400
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/d400euk.jpg)
PT-D400
Dato: 16.11.2018 ID: faqp00001293_005
How do I eliminate the margin from the start or end of my label when printing?
Due to the construction of the tape mechanism, 23.9 mm (0.94") piece of tape that is produced prior to every label cannot be eliminated. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
The following methods are useful for reducing tape use:
-
Method 1 - Selecting "Narrow" in the Margin setting:
-
Press the [Label] key (
/
).
-
Press the arrow key
or
to select "Margin".
-
Press the arrow key
or
to select "Narrow".
-
Press the [OK] key (
) or [Enter] key (
/
).
This eliminates the margin at the end of the tape after printing as shown below:Setting Example Full Half Narrow
-
Press the [Label] key (
-
Method 2 - Printing several labels at once by using the "Copies" function:
-
Press the [Label] key (
/
).
-
Press the arrow key
or
to select "Margin".
-
Press the arrow key
or
to select "Narrow".
-
Press the [OK] key (
) or [Enter] key (
/
).
-
Press the [Print] key (
/
) and select the number of copies to be printed using the arrow
or
key.
-
Press the [Print] key (
/
), [OK] key (
) or [Enter] key (
/
).
This eliminates the margin of the subsequent labels as shown below:
-
Press the [Label] key (
- Method 3 - Printing several labels at once by using the "Numbering" function:
-
Press the [Label] key (
/
).
-
Press the arrow key
or
to select "Margin".
-
Press the arrow key
or
to select "Narrow".
-
Press the [OK] key (
) or [Enter] key (
/
).
-
While holding down the [Shift] key (
/
), press the [Print] key (
/
) to display the print options screen.
-
Select "Numbering" using the arrow
or
key.
-
Press the [OK] key (
) or [Enter] key (
/
) and select the number of copies to be printed using the arrow
or
key.
-
Press the [Print] key (
/
), [OK] key (
) or [Enter] key (
/
).
- Method 4 - Printing different labels continuously:
-
Press the [Label] key (
/
).
-
Select the "Margin" menu.
- Select "Chain".
-
Press the [OK] key (
) or [Enter] key (
/
).
- Enter the text.
-
Press the [Print] key (
/
).
-
Select the number of copies to be printed using the arrow
or
key.
-
Press the [Print] key (
/
), [OK] key (
) or [Enter] key (
/
).
-
Repeat step 5 to 8 until all labels have been created.
An example of the labels:
PT-D400
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.