Vanlige spørsmål og feilsøking

Lukk

HL-L2357DW

Vanlige spørsmål og feilsøking

Vanlige spørsmål og feilsøking

HL-L2357DW

Ikke ditt produkt?

Dato: 10.01.2019 ID: faq00100268_508

Load Paper in the Paper Tray

  • If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions.

  • When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer.
  1. Pull the paper tray completely out of the machine.
  2. Press and slide the paper guides to fit the paper.
    Press the green release levers to slide the paper guides.
  3. Fan the stack of paper well.
  4. Load paper in the paper tray with the printing surface face down.
  5. Make sure the paper is below the maximum paper mark (  ).
    Overfilling the paper tray will cause paper jams.
  6. Slowly push the paper tray completely into the machine.
  7. Lift the support flap to prevent paper from sliding off the output tray.

Beslektede vanlige spørsmål

Beslektede modeller

HL-L2310D, HL-L2350DW, HL-L2357DW, HL-L2370DN, HL-L2375DW

Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:

Tilbakemelding om innhold

Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?

Merk at dette skjemaet kun benyttes for tilbakemeldinger.

Send