HL-L2357DW
 |
Vanlige spørsmål og feilsøking |
HL-L2357DW
Dato: 10.01.2019 ID: faq00100216_510
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network.
- To start printing, press
on the control panel and then send a print job.
HL-L2310D
- Make sure that the front cover is closed and the power cord is plugged in.
- Press to turn on the machine and make sure only the Ready LED lights up.
- Press Go four times to turn the function On or Off.
All LEDs blink twice when Auto Power Off Mode is turned on.
All LEDs blink once when Auto Power Off Mode is turned off.
HL-L2350DW/HL-L2357DW/HL-L2370DN/HL-L2375DW
Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
- Press
or 
to display the [General Setup] option, and then press OK. - Press or to display the [Ecology] option, and then press OK.
- Press or to select the [Auto Power Off] option, and then press OK.
- Press or to select the option you want, and then press Go.
HL-L2310D, HL-L2350DW, HL-L2357DW, HL-L2370DN, HL-L2375DW
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.