Vanlige spørsmål og feilsøking

Lukk

DCP-J1200W(E)

Vanlige spørsmål og feilsøking

Vanlige spørsmål og feilsøking

DCP-J1200W(E)

Ikke ditt produkt?

Dato: 27.05.2021 ID: faq00000460_521

Reset Your Machine

The following reset functions are available.

Machine Reset

You can reset all the machine’s settings that you have changed, such as Date and Time.

  1. Press image(STOP) and MONO COPY simultaneously.
    The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
  2. Press and hold MONO COPY for two seconds.
    The machine restarts.

Network

Reset the print server back to its default factory settings (includes Password and IP Address information).

  1. Press image(Wi-Fi) and image(STOP) simultaneously.
    The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts blinking.
  2. Press and hold COLOUR COPY for two seconds.　
    The machine restarts.

All Settings

Use this reset function to reset all machine's settings to the settings originally set at the factory.

Brother strongly recommends you perform this operation when you dispose of the machine.

  1. Press image(STOP) and MONO COPY simultaneously.
    The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
  2. Press and hold COLOUR COPY for two seconds.　
    The machine restarts.

Beslektede modeller

DCP-J1200W(E)

Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:

Tilbakemelding om innhold

Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?

Merk at dette skjemaet kun benyttes for tilbakemeldinger.

Send