MFC-7420
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/mfc7420_all.jpg)
MFC-7420
Dato: 06.09.2006 ID: faq00000299_006
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 05 for 2005).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set key.
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set key.
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle in fax mode. When the unit is in Sleep mode, the LCD shows Sleep.
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.