MFC-8860DN
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/mfc8860dn_all.jpg)
MFC-8860DN
Dato: 10.03.2006 ID: faq00000292_012
What kind of memory can I use?
This machine has 32 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs). When you add the optional memory, it increases the performance for both copier and printer operations.
In general, the DIMM must have the following specifications:
- Type: 144 pin and 64 bit output
- CAS Lantency: 2
- Clock Frequency: 100 MHz or more
- Capacity: 64, 128, 256 or 512 MB
- Height: 31.75 mm (1.25 inches)
- DRAM Type: SDRAM 2 Bank
This type of memory DIMM is available from most major memory suppliers.
The chart below lists two suppliers and their part numbers.
Buffalo Technology | 128 MB | VN133-D128 / VN133-X128 |
256 MB | VN133-D256 | |
512 MB | VN133-D512 | |
TechWorks | 64 MB | 12165-0004 |
128 MB | 12462-0001 | |
256 MB | 12485-0001 | |
512 MB | 12475-0001 |
- For more information, contact Brother Customer Service.
Beslektede vanlige spørsmål
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.