HL-1650
Vanlige spørsmål og feilsøking |
HL-1650
Dato: 27.01.2014 ID: faq00000168_001
ERROR XX <-> SERVICE CALL
When any of the following messages appear on the LCD, turn the printer Off, wait 5 seconds and then turn the printer On again. If the alarm continues, perform a Factory Reset as follows:
- Press the - (minus) button until the screen says Reset Menu. The LCD should be amber.
- Press the Set button.
- Press the + (plus) or - (minus) button until the LCD says Factory Reset, press Set.
- The LCD will say OK? confirming your selection. Press the Set button.
-
The printer will automatically go to a green Ready on the LCD.
If this does not clear the problem, consult your dealer or our authorized service representative.
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.