HL-6180DW
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/hl6180dw_all_2.jpg)
HL-6180DW
Dato: 22.02.2013 ID: faq00000095_028
Install the optional tray unit.
- Turn off the printer power switch, and remove all the cables from the machine.
![Remove all the cables](/g/b/img/faqend/faq00000095_028/eu_ot/en/4344/Step1.gif)
- Lift the printer carefully with both hands and place it onto the lower tray unit, so that the alignment pins of the lower tray unit are inserted into the guide holes on the bottom of the printer.
![Place printer onto lower tray unit](/g/b/img/faqend/faq00000095_028/eu_ot/en/31917/faq000095_012.gif)
Driver configuration for Windows users:
Follow the instructions below to configure the printer driver to work with the lower tray.
- Open Printer Properties. (Click here to see how to open Printer Properties.)
- Choose the Accessories tab and click Auto Detect, once the lower trays and paper size have been detected then click Apply.
(Under certain conditions Auto Detect may not be available. If this situation occurs, you can manually add the lower tray. In Available Options select the Tray 2, click Add and then Apply.)
![Click auto detect](/g/b/img/faqend/faq00000095_028/eu_ot/en/31938/e5470_u_wxpc003.gif)
For Macintosh users:
The printer driver is already configured for use with the lower paper trays. No additional steps are required.
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.