PT-P900W/P900Wc
Veelgestelde vragen en probleemoplossing |
PT-P900W/P900Wc
Datum: 03-12-2019 Nummer: faqp00100008_001
The label does not cut well.
If the label does not cut well or tape is jammed in the cutter, tape adhesive may have built up on the cutter blades after repeated use. To correct this problem, the tape cutter must be cleaned.
Cleaning the tape cutter
Wipe the cutter blades using a dry cotton swab.
-
Frequent cleaning is recommended.
- Cutter blade
- Cotton swab
-
Metal section
Do not touch the cutter blade with your bare hands.
If the problem still occurs, download and install the latest version of the firmware from the [Downloads] section of this website.
PT-P900W/P900Wc, PT-P950NW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.