CM600
Veelgestelde vragen en probleemoplossing |
CM600
Datum: 10-07-2017 Nummer: faqh00000714_000
Loading and Unloading the Mat
The cutting mats used by this machine have been redeveloped with a different design, type, function, etc.
For details, refer to Important information about Mat.
Loading the Mat
-
Attach the material that will be cut to the mat.
For details on attaching material to the mat, see Mat and cutting blade combinations.
-
While holding the mat level and lightly inserting it into the feed slot, press in the operation panel.
Lightly insert the mat so that it aligns with the guides on the left and right sides of the feed slot and is tucked under the feed rollers.
(1) Guides
(2) Feed rollers
>> The mat is fed in to complete the preparations for cutting.
Unloading the Mat
-
Press in the operation panel to feed out the mat.
-
Peel off the material from an area that is easily removable, such as a corner, and then slowly peel while maintaining an even pressure.
-
Holding the mat with your hand, use the included spatula to carefully peel off the cutout patterns.
(1) SpatulaFor instructions on how to peel off the material, see Attaching & Peeling off the material.
Verwante vragen
CM260, CM300, CM600, CM840
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.