Innov-is 900
![]() |
Veelgestelde vragen en probleemoplossing |
![](/g/b/img/product/hf_inov900deuk.jpg)
Innov-is 900
Datum: 14-05-2015 Nummer: faqh00000131_000
"Change to the single needle mode." appears on the LCD.
The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.