MFC-J6710DW
 |
Veelgestelde vragen en probleemoplossing |
MFC-J6710DW
Datum: 11-05-2020 Nummer: faq00100029_009
Enable the Brother machine's network interface.
Follow the steps below to enable the Brother machine's network interface.
A wired and a wireless network connection cannot be used at the same time. Select the network connection type you want to use.
-
Press Settings or Menu.
-
Press the Up or Down arrow key to select the following:
-
Select Network. Press OK.
-
Select Network I/F. Press OK.
- Select Wired LAN or WLAN. Press OK.
-
Select Network. Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Verwante vragen
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
DCP-375CW, DCP-585CW, DCP-J715W, MFC-490CW, MFC-5895CW, MFC-6490CW, MFC-J615W, MFC-J6510DW, MFC-J6710DW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.