MFC-J6925DW
![]() |
Veelgestelde vragen en probleemoplossing |
![](/g/b/img/product/mfcj6925dw_us_eu.jpg)
MFC-J6925DW
Datum: 18-10-2013 Nummer: faq00002925_004
Load photo paper
- If you want to load standard paper, click here to see how to load standard paper.
- If you want to load envelopes, click here to see how to load envelopes.
Follow the steps below to load photo paper in your Brother machine's paper tray:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Before loading, press the corners and sides of the Photo, Photo L and Photo 2L paper to make them as flat as possible.
If Photo (10 x 15 cm)/(4 x 6 in.) or Photo L (89 x 127 mm)/(3.5 x 5 in.) or Photo 2L (13 x 18 cm)/(5 x 7 in.) paper is "double-feeding," put only one sheet of Photo or Photo L paper in the paper tray at a time.
- Do one of the following:
- If you load Photo L (89 x 127 mm)/(3.5 x 5 in.) in the paper tray, lift up the Photo L stopper (1).
- If you load Photo (10 x 15 cm)/(4 x 6 in.) or Photo 2L (13 x 18 cm)/(5 x 7 in.) in the paper tray, open the output paper tray cover. Gently press the paper length guide (1) to fit the paper size, and then close the output paper tray cover.
- If you load Photo L (89 x 127 mm)/(3.5 x 5 in.) in the paper tray, lift up the Photo L stopper (1).
- Gently press the paper side guides to fit the paper size.
- Put Photo, Photo L, or Photo 2L paper in the paper tray print side down.
- Gently adjust the paper side guides to fit the paper. Make sure the paper side guides touch the sides of the paper.
Verwante vragen
MFC-J6520DW, MFC-J6720DW, MFC-J6920DW, MFC-J6925DW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.