DCP-L6600DW
![]() |
Veelgestelde vragen en probleemoplossing |
![](/g/b/img/product/dcpl6600dw_eu.jpg)
DCP-L6600DW
Datum: 12-04-2016 Nummer: faq00000310_502
Paper is Jammed in the 2-sided Tray
If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps:
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Pull the paper tray completely out of the machine.
- At the back of the machine, pull the 2‑sided tray completely out of the machine.
- Pull the jammed paper out of the machine or out of the 2‑sided tray.
- Remove paper that may have jammed under the machine due to static electricity.
- If paper is not caught inside the 2-sided tray, open the back cover.
- WARNING
- HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.
- Use both hands to gently pull the jammed paper out of the back of the machine.
- Close the back cover until it locks in the closed position.
- Put the 2-sided tray firmly back in the rear of the machine.
- Put the paper tray firmly back in the front of the machine.
Verwante vragen
DCP-L5500DN, DCP-L6600DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.