HL-2250DN
 |
Veelgestelde vragen en probleemoplossing |
HL-2250DN
Datum: 19-07-2010 Nummer: faq00000307_014
JAM TRAY 1
When the JAM TRAY 1 message appears, the following LED indications is shown on the control panel. The Error LED is flashing.
Please follow the steps below to solve the problem:
After you have just used the printer, some internal parts will be extremely hot. Wait at least 10 minutes for the machine to cool down.
- Pull the paper tray completely out of the machine.
- Use both hands to slowly pull out the jammed paper.
- Put the paper tray firmly back in the machine.
- Make sure that the Error LED is off and then, the Ready LED lights. If the machine does not start printing automatically, press the Go button.
Always remove all paper from the paper tray and straighten the stack when you add new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Verwante vragen
HL-2130, HL-2135W, HL-2240, HL-2240D, HL-2250DN, HL-2270DW
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.