FAQs & Troubleshooting

Close

MFC-3420C

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-3420C

Not your product?

Date: 07/09/2006 ID: faq00000299_001

How do I program the date and time?

To set the date and time, follow the instructions listed below:


  1. Press the Menu/Set or Menu key on the Control Panel.
  2. Press the up or down navigation key and select Initial Setup,  then Date/Time.
  3. The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 06 for 2006).
  4. Press the Menu/Set or Menu key .
  5. The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
  6. Press the Menu/Set or Menu key .
  7. The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
  8. Press the Menu/Set or Menu key .
  9. The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
  10. Press the Menu/Set or Menu key .
  11. Press the Stop/Exit key on the Control Panel.

The LCD will display the date and time whenever the unit is idle.

Related Models

DCP-110C, FAX-1820C, FAX-1840C, MFC-210C, MFC-215C, MFC-3220C, MFC-3240C, MFC-3420C, MFC-410CN, MFC-425CN, MFC-5840CN, MFC-620CN, MFC-640CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.