MFC-T800W
Preguntas frecuentes y Solución de problemas |
MFC-T800W
Fecha: 29/05/2013 ID: faq00000105_027
Reset the network settings to the factory default.
Follow the steps below to reset the network settings back to its default factory settings (resetting all information such as the password and IP address information).
This function restores all wired and wireless network settings to the factory default.
- Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
- Press Menu.
- Press the Up or Down arrow key to choose Network and press OK.
- Press the Up or Down arrow key to choose Network Reset and press OK.
- - For MFC Users:
Press 1 for Reset.
- For DCP Users:
Press the Up arrow key for Reset.
- - For MFC Users:
Press 1 for Reboot.
- For DCP Users:
Press the Up arrow key for Reboot.
- The machine will restart, re-connect cables once this is complete.
DCP-J105, DCP-J152W, DCP-T500W, DCP-T700W, MFC-J200, MFC-J470DW, MFC-T800W
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.