PJ-663
![]() |
Preguntas frecuentes y solución de problemas |
![](/g/b/img/product/pj663eus.jpg)
PJ-663
Fecha: 19/11/2019 ID: faqp00001684_000
How to reduce the time to start printing after clicking the [Print] button
Set the compression mode setting to [ON] by following the instructions below:
Make sure the firmware version of your printer is 2.02 or later.
You can download the latest version of the firmware from the [Downloads] section of this website.
-
Open the Print dialog box. Choose your printer [PJ-xxx], and click [Preferences].
-
Click [Advanced].
-
Select [Enable] in the Data Compression setting.
The amount of time reduction depends on the size of data sent to the printer.
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.