Innov-is NS1750D
Preguntas frecuentes y solución de problemas |
Innov-is NS1750D
Fecha: 21/07/2017 ID: faqh00100040_009
How do I remove or attach the presser foot holder?
Remove the presser foot holder when cleaning the machine or when installing a presser foot that does not use the presser foot holder, such as the walking foot and quilting foot.
Removing the presser foot holder
-
Raise the presser foot lever.
-
Press .
>>The screen changes, and all keys and operation buttons are locked (except ).
-
Remove the presser foot.
For details, refer to “How do I remove or attach the presser foot?”.
-
Use the screwdriver to loosen the presser foot holder screw.
Turn the screw toward the back of the machine (counterclockwise).
The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver.
-
Press to unlock all keys and buttons.
Attaching the presser foot holder
-
Raise the presser foot lever
-
Press .
>> The screen changes, and all keys and operation buttons are locked (except ).
-
Align the notch in the presser foot holder with the screw.
(1) Screw
(2) Notch in presser foot holder
-
Hold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.
Turn the screw toward you (clockwise).
Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break.
-
Press to unlock all keys and buttons.
Preguntas frecuentes relacionadas
Innov-is NS1750D, Innov-is NS1850L, Innov-is NV960DL, Innov-is NV970L, SE600, SE625, SE700
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.