NX-400Q/400
![]() |
Preguntas frecuentes y solución de problemas |
![](/g/b/img/product/hf_nx400qeus.jpg)
NX-400Q/400
Fecha: 14/05/2015 ID: faqh00000131_000
"Change to the single needle mode." appears on the LCD.
The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
CS-8150, HE-120, Innov-is 1000, Innov-is 1200, Innov-is 500D, Innov-is 900D, Innov-is 950D, Innov-is 990D, NX-400Q/400, NX-600, PC-420/420PRW, SE-270D, SE-350
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.